The Electrolux FAVORIT 33060 i Dishwasher has some known problems that occur often. Here are some easy to do solutions for the problems or error codes your Electrolux might be giving you.
The door of the dishwasher is not closed properly or mains plug is not plugged in. Alternatively, the house fuse may be defective or a start delay is selected.
Possible causes include selecting the wrong wash programme, overloading the dish racks, a dirty or incorrectly positioned filter, or insufficient detergent.
The anti-flood system has been triggered which is causing the drain pump to run.
This issue may occur if rinse aid was not used or if the rinse aid container is empty.
This can be caused by an excessive rinse aid dosage.
This occurs when the rinse aid dosing is insufficient.
Electrolux FAVORIT 33060 i Dishwasher: A Blend of Efficiency and Innovation: The Electrolux FAVORIT 33060 i dishwasher stands as a testament to modern engineering, combining efficiency with ecological consciousness. Designed to handle a capacity of up to 12 place settings, this dishwasher is perfect for both small and large households. Its dimensions, with a height adjustable between 820 to 880 mm and a depth of 546 to 550 mm, make it ideal for seamless integration into any kitchen design. The appliance operates with an impressive energy efficiency, consuming as little as 1.15 kWh per cycle, and uses between 9 to 22 liters of water depending on the selected wash program, ensuring minimal environmental impact. The FAVORIT 33060 i is equipped with a comprehensive control panel that simplifies operation, allowing users to select the optimal wash program according to the nature and degree of soiling on their dishes. For those concerned with installation, this unit is designed for easy connectivity to existing plumbing and electrical systems, featuring a user-friendly setup process. Trust in the Electrolux brand, known globally as a leader in home appliances, to deliver a dishwasher that not only meets but exceeds expectations in both performance and sustainability.